| Stretching Unit For Polyester Mesh | Heat Table |
X303 Laser Frame for Foils
Price: $1400.00 ea
The frame is machined from high strength 6061-T6 aluminum with a double box corner jointed system for exceptional strength, stiffness, and squareness.
These materials and construction techniques come together to create a flatter, lighter, and more precise laser platform for your stencil foil creation. This is a definitive improvement over welded tubular frame systems.
Load time for this system is aproximately 1 minute.
Products Represented By:
Four Points SMT Stencil Supply
Hobe Sound, FL 33455 Tel: 772-288-3271 Fax: 772-288-4520 Email:
tdesisto@msn.com
-------------------------------------------------------------------------------
Foil Storage Racks
from
Printer's Edge
Now available
Stencil Storage Racks
from
Printer's Edge
Custom manufactured racks for stencil frames of all sizes and types.
All racks have 4 casters (2 locking), or Leveling feet.
They are welded aluminum construction and powder coated.
Products Represented By:
Four Points SMT Stencil Supply
Hobe Sound, FL 33455 Tel: 772-288-3271 Fax: 772-288-4520 Email:
tdesisto@msn.com
|
|
|
|
Size: (6) Ten inch Clamps per side
Pneumatic pistons lift and hold frames in place.
Large hand crank wheels for easy manual stretching.
Will hold (2) 29” x 29” frames or (2) 23" x 23" frames
Small Footprint:
75" x 89" O.D.
Printer's Edge
:
Products Represented By:
Four Points SMT Stencil Supply
Hobe Sound, FL 33455 Tel: 772-288-3271 Fax: 772-288-4520 Email:
tdesisto@msn.com
|
|
Size: 4’ x 8’
Printer's Edge
4965 Mahoning Ave, Warren, OH 44483
Tel: 330-372-2232
Construction: Welded Steel Table, with 1/2" x 4' x 8' Aluminum Top
Heaters: (4) Strip heaters (CSA approved) mounted under top
Table is design to run at approximately 140 degrees F
|
See Specifications and other pictures for Stretching Table above.
|
|
RST Squeegee Durometer
( for complete specifcations go to
www.rstgauge.com
)
Shore A ASTM D-2240
Made in the USA
Price: $250.00
RST 952 SMT Foil Tension Analyzer
( for complete specifcations go to
www.rstgauge.com
)
This device is designed to measure the tension on a stencil foil that is mounted either on mesh or direct to frame.
Measurements are in 0.001" , tolerance is +/- 0.001".
Made in the USA
Price: $695.00
RST Model "L" Screen Tension Gauge
( for complete specifcations go to
www.rstgauge.com
)
Low cost screen tension meter.
Clearly marked dial. Reading form 7 to 50 N/cm.
Expanded dial allows operator to take accurate readings.
High accuracy: +/- 1 N/cm
Optional mounting of the indicator, parallel or perpendicular to the base.
Perpendicular mounting of the indicator makes readings easier for the operator.
Made in the USA
Price: $375.00
RST Model "G" Screen Tension Meter
( for complete specifcations go to
www.rstgauge.com
)
Gravity driven device that never needs re-calibration.
Low cost screen tension meter.
Clearly marked dial. Reading form 7 to 50 N/cm.
Expanded dial allows operator to take accurate readings.
High accuracy: +/- 1 N/cm
Made in the USA
Price: $395.00
Products Represented By:
Four Points SMT Stencil
Supply,
Hobe Sound, FL 33455 Tel: 772-288-3271 Fax: 772-288-4520 Email:
tdesisto@msn.com
______________________________________________________________________________________________________________________
Printer's Edge
#5100 Block-out Tape
Heavy Duty
Metallized PET Film Blockout Tape
Available in:
1" wide x 36 yards per roll, (48/case)
2" wide x 36 yards per roll, (24/case)
Low cost Block-out Tape
#6036
Metallized PET Film Blockout Tape
Available in:
1" wide x 36 yards per roll, (48/case)
2" wide x 36 yards per roll, (24/case)
Products Represented By:
Four Points SMT Stencil
Supply,
Hobe Sound, FL 33455 Tel: 772-288-3271 Fax: 772-288-4520 Email:
tdesisto@msn.com
 |
| Home
| Adhesives
| Mesh
| Frames
| Pre Meshed Frames
| Space Saver Frames
| 304 Stainless
|
| Invar | Alloy 42 | Squeegee High Duro | Squeegee Low Duro | Accessories | | Suppliers | Specs | Newsletter | RoHS/WEEE | Search | Contact Us | |
|
Copyright © 2012 Four Points, SMT Stencil Supply
|
.JPG)
